KCD1-101-BL vertical bending foot side inserted with positioning rocker switch

Short Description:

Rocker switch is also called rocker switch. Its structure is the same as the button switch, except that the handle of the button is changed to a boat shape. The rocker switch is often used as a power switch for electronic equipment. Its contact points are divided into single-pole single-throw (SPDT) and double-pole double-throw (DPDT). Some switches also have indicator lights.


Product Detail

Product Tags

Specifications

 

Rocker Switch Specifications

 

Load Rating:3A 250V AC

working temperature:- 40 ~ +70 ℃

Relative humidity:93% 40 ℃

Action force:≤ 5N

contact resistance:≤ 50mΩ

insulation resistance:≥ 100mΩ

withstand voltage:AC 1500V

weldability:connector shall be immersed in solder for 3±0. 5S at 260±5°C, and

The print-through area shall account for more than 90% of the immersion area.

welding resistance:manual welding temperature is controlled at 350±5 ℃ and the time is 3±0. 5S,

appearance and electrical performance are normal.

vibration resistance:2mm amplitude, 5 minutes in each vibration direction, no mechanical and

electrical performance failure.

 

Salt spray test:

When the salt solution concentration is 5±1% (mass percentage) and

the temperature is 35±2 ℃ for 24±1 hours, the deposit is

experiment, no

obvious corrosion spots.

 

Service life (times):> 10000 (times)


  • Previous: KCD4-101A-6P 6-pin power switch for rocker of 2nd gear ship switch
  • Next: KCD4-201N Gear 2 square red button waterproof boat switch kcd4 rocker 4-pin high-power button with switch

  • KCD1-101-BL,kcd1,rocker switch,boat switch,electronic switches,electronic components,aike electric,wenzhou a
    Write your message here and send it to us